User's Manual

Menus and Parameters
Manual Revision 1.0
4-17
 FTP Client IP Mask: The FTP Client IP Mask option enables
defining the IP Mask for the FTP client mask in the unit.
The default is: 255.255.255.0
 FTP Server IP Address: The FTP Host IP Address option enables
defining the IP address of the FTP server that is hosting the file.
The default is: 1.1.1.4
 FTP Gateway IP Address: The FTP Gateway IP Address option
enables defining the FTP default gateway address.
The default is: None (empty)
 FTP User Name: The FTP User Name option enables defining the
user name to be used for accessing the FTP server that is hosting
the file.
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
 FTP Password: The FTP Password option enables defining the
password to be used for accessing the FTP server that is hosting the
file.
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
 Show Configuration File Upload/Download Parameters: Displays
the current values of the Configuration File Upload/Download
parameters.
NOTE
There is one set of general FTP parameters (FTP Server IP Address, FTP Gateway
IP Address, FTP Client IP Address, FTP Client IP Mask, FTP User Name and FTP
Password). This set (or relevant parts of the set) serves the SW Download Procedure,
the Configuration File Upload/Download procedure and the Event Log File Upload
procedure. Changing any of these parameters in the menu for either procedure will
automatically change its value in the menu for the other procedure.
Log Out Timer
The Log Out Timer parameter determines the amount of inactive time
following which the unit automatically exits the Monitor program.
The time out duration can range from 1 to 999 minutes.
The default value is 5 minutes.