User's Manual

Menus and Parameters
Manual Revision 1.0
4-15
 FTP Client IP Address: The FTP Client IP Address option enables
defining the IP address of the FTP client in the unit. This secondary
IP address is required only to support the optional FTP process.
The default is: 1.1.1.3
 FTP Client IP Mask: The FTP Client IP Mask option enables
defining the IP Mask for the FTP client mask in the unit.
The default is: 255.255.255.0
 FTP Server IP Address: The FTP Server IP Address option enables
defining the IP address of the FTP server that is hosting the SW
Version file.
The default is: 1.1.1.4
 FTP Gateway IP Address: The FTP Gateway IP Address option
enables defining the FTP default gateway address.
The default is: None (empty)
 FTP User Name: The FTP User Name option enables defining the
user name to be used for accessing the FTP server that is hosting
the SW Version file.
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
 FTP Password: The FTP Password option enables defining the
password to be used for accessing the FTP server that is hosting the
SW Version file.
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
 Show SW Version Download Parameters and Status: Displays the
current values of the SW Version Download parameters, the current
SW version and the SW versions stored in the Flash memory.
NOTE
There is one set of general FTP parameters (FTP Server IP Address, FTP Gateway
IP Address, FTP Client IP Address, FTP Client IP Mask, FTP User Name and FTP
Password). This set (or relevant parts of the set) serves the SW Download Procedure,
the Configuration File Upload/Download procedure and the Event Log File Upload
procedure. Changing any of these parameters in the menu for either procedure will
automatically change its value in the menu for the other procedure.