User's Manual

Menus and Parameters
Manual Revision 1.0
4-5
Menus and Parameters
The following sections describe the menus and parameters provided by
the Monitor program.
Main Menu
The Main Menu enables you to access the following menus, depending
on your access level, as described in
Working with the Monitor Program,
on page 4-2.
 Info Screens: Provides a read only display of status information and
current parameter values. Available at all access levels.
 Unit Control: Enables you to access general operations, such as
resetting the unit, reverting to factory default parameters, changing
passwords and switching between software versions. Available at the
Installer and Administrator access levels.
 Basic Configuration: Enables you to access the set of parameters
that are configured during the installation process. These
parameters are also available in the Advanced Configuration menu.
Available at the Installer and Administrator access levels.
 Site Survey: Enables you to activate certain tests and view various
system counters. Available at the Installer and Administrator access
levels.
 Advanced Configuration: Enables you to access all system
parameters, including the parameters that are also available in the
Basic Configuration menu. Available only at the Administrator
access level.
Info Screens Menu
The Info Screens menu enables you to view the current values of
various parameter sets. The parameter sets are identical to the main
parameter groups in the configuration menus. You can view a specific
parameter set or choose to view all parameters at once. While this menu
is available at all access levels, some security related parameters
including the encryption Keys, ESSID and Operator ESSID are only
displayed to users with Administrator access rights.