User's Manual

Working with the Monitor Program
Manual Revision 1.0
4-3
BreezeNET B/BU
Official Release Version – 1.1.3
Release Date: Mon Jul 01 2003, 17:10:21
Main Menu
==========
1 – Info Screens
2 – Unit Control
3 - Basic Configuration
4 – Site Survey
5 - Advanced Configuration
x - Exit
>>>
Figure 4-1: Main Menu (Administrator Level)
NOTE
If the Telnet session is not terminated properly; for example, if you simply close the
window, the monitor program is blocked for several minutes. To enable access to the
monitor program during that time, the unit must be reset via SNMP or by
disconnecting/reconnecting power.
The appearance of the Main Menu varies depending on the user's access
level, as follows.
 For users with read only access rights, only the Info Screens option
is displayed. Users with this access level are not able to access the
Unit Control, Basic Configuration, Site Survey and Advanced
Configuration menus.
 For users with Installer access rights, the first four menu items, Info
Screens, Unit Control, Basic Configuration and Site Survey, are
displayed. Users with this access level are not able to access the
Advanced Configuration menu.
 For users with Administrator access rights, the full Main Menu is
displayed. These users can access all the menu items.