User's Manual

Configuring Basic Parameters
Manual Revision 1.0
3-3
Table 3-1: Basic Parameters
Parameter Default Value Comment
Frequency Subset Definition (RB) A (All)
Tx Power for Modulation Levels 1
to 5
21
Tx Power for Modulation Level 6 21
Tx Power for Modulation Level 7 21
Tx Power setting must be
in accordance with
applicable regulations.
For example, for
compliance with FCC
regulations the maximum
EIRP in the AU (Tx
Power + Antenna Gain)
cannot exceed 36 dBm
ATPC Option Enable
Best BU Support (RB) Disable
Preferred BU MAC Address (RB) 00-00-00-00-00-00 (none) Applicable only when
Best BU Support is
enabled
Maximum Cell Distance (BU) 0 (No Compensation)
Maximum Modulation Level 7 Refer Configuring the
Maximum Modulation
Level on page 3-7
VLAN Link Type Hybrid
VLAN ID-Management 65535
Authentication Algorithm* Open System
Data Encryption Option* Disable
Security Mode* WEP
Promiscuous Authentication (BU)* Disable
Default Key (RB)* Key 1
Key 1 to Key 4* 00……0 (32 zeros,
meaning no key)
* Some or all of the Security parameters may not be available in units that do not support the
Authentication Security and/or Data Encryption feature.