User's Manual

Chapter 2 - Installation
BreezeNET B System Manual
2-10
5. Connect the 10/100 BaseT ETHERNET connector located on the
front panel of the unit to the network. The cable connection should
be a straight Ethernet if connecting the indoor unit to a Hub/Switch
and a crossed cable if connecting it directly to a PC Network
Interface Card (NIC).
NOTE
The length of the Ethernet cable connecting the indoor unit to the user's equipment,
together with the length of the Indoor-to-Outdoor cable, should not exceed 100 meters.
NOTE
Reset the unit using the RESET recessed push button after connecting or reconnecting
the indoor and outdoor units with the indoor-to-outdoor cable.