User's Manual

Chapter 2 - Installation
BreezeNET B System Manual
2-2
Installation Requirements
This section describes all the supplies required to install the
BreezeNET B system components and the items included in each
installation package.
Packing List
 IDU indoor unit with a wall mounting kit
 Mains power cord
 ODU outdoor unit with an integrated antenna (regular model)
Or
ODU outdoor unit with a connection to a detached antenna (not
included)
 Pole mounting kit for the ODU
 Cat.5 indoor-to-outdoor Ethernet cable with shielded RJ-45
connectors
Additional Installation Requirements
The following items are also required to install the BreezeNET B system:
 Detached Antenna* (for D model units), including a pole mounting
kit and an RF cable.
 Ethernet cable (straight for connecting to a hub/switch etc., crossed
for connecting directly to a PC’s NIC)
 Crimping tool for RJ-45 connectors.
 Ground cables with an appropriate termination.
 Mains plug adapter or termination plug (if the power plug on the
supplied AC power cord does not fit local power outlets).
 Portable PC with Ethernet card and BreezeCONFIG* application and
a crossed Ethernet cable.
 Installation tools and materials, including appropriate means (e.g. a
pole) for installing the outdoor equipment.
NOTE
Items marked with an asterisk (*) are available from Alvarion.