User's Manual

Chapter 4 - Operation and Administration
BreezeNET B System Manual
4-64
Set User Filter Range
The Set User Filter Range option enables defining a range of addresses
for each of the User Filter IP Address entries. The range includes the
base address.
Available values range from 0 to 255.
The default value is 0 (not used).
NOTE
You can enter either a mask or range, but not both, to define a group of user filter
addresses. If the range is other than 0, than the mask is ignored.
If IP broadcast packets are supposed to reach a device behind an RB unit, the
broadcast IP address must be included in the list of user filter addresses.
Delete a User Filtering Entry
The Delete a User Filtering Entry option enables deleting a selected
entry from the User Filtering list. The entry is replaced by the default
value.
Delete All User Filtering Entries
The Delete All User Filtering Entries option enables deleting all entries
from the User Filtering list. The list entries are replaced by the default
values.
Show All User Filtering Parameters
The Show All User Filtering Parameters option displays the current
value of the User Filtering Option and the list of User Filtering
addresses, subnet masks and ranges.