User's Manual

About this Guide
This manual describes the BreezeNET B Point-to-Point Wireless Bridge
Release 1.1 and how to install, operate and manage the system
components.
This guide is intended for technicians responsible for installing, setting
up and operating the BreezeNET B system, and for system
administrators responsible for managing the system.
This guide contains the following chapters and appendices:
 Chapter 1 – System description: Describes the BreezeNET B
system and its components.
 Chapter 2 – Installation: Describes how to install the system
components.
 Chapter 3 – Commissioning: Describes how to configure basic
parameters, align the antenna and validate unit operation.
 Chapter 4 – Operation and Administration: Describes how to use
the BreezeNET B Configuration Utility application for configuring
parameters, checking system status and monitoring performance.
 Appendix A – Software Version Loading Using TFTP: Describes
how to load a new software version using TFTP.
 Appendix B – Configuration Download and Upload Using TFTP:
Describes how to download and upload configuration files using
TFTP.
 Appendix C – Preparing the indoor to outdoor cable: Provides
details on preparation of the indoor to outdoor Ethernet cable.
 Appendix D – Parameters Summary: Provides an at a glance
summary of the configuration parameters, value ranges and default
values.