User's Manual

Menus and Parameters
Manual Revision 1.0
4-57
PPPoE Broadcast Override Filter
The PPPoE Broadcast Override Filter option enables or disables the
broadcasting of PPPoE (Point to Point Protocol over Ethernet) messages.
Even if according to the selected option in the Filter Options parameter,
broadcast messages should be filtered, PPPoE broadcasts are
transmitted if this parameter is set to Enable. Select from the following
options:
 Disable, which means that PPPoE Broadcast messages are filtered
or transmitted according to the general filtering criteria in the Filter
Options parameter.
 Enable, which means that PPPoE Broadcast messages are
transmitted regardless of the selected value of the Filter Options
parameter.
The default selection is Disable.
ARP Broadcast Override Filter
The ARP Broadcast Override Filter option enables or disables the
broadcasting of ARP messages. Even if according to the selected option
in the Filter Options parameter, broadcast messages should be filtered,
ARP broadcasts are transmitted if this parameter is set to Enable. Select
from the following options:
 Disable, which means that ARP messages are filtered or transmitted
according to the general filtering criteria in the Filter Options
parameter.
 Enable, which means that ARP messages are transmitted regardless
of the selected value of the Filter Options parameter.
The default selection is Enable.
Bridge Aging Time
The Bridge Aging Time parameter enables selecting the bridge aging
time for learned addresses of devices on both the wired and wireless
sides, not including BreezeNET B units.
The available range is 20 to 2000 seconds.
The default value is 300 seconds.
Show Bridge Parameters
The Show Bridge Parameters option displays the current values of the
Bridge parameters.