User's Manual

Menus and Parameters
Operation and Administration
167
correct routing of transmissions to these clients. The new AU as well as the
previous AU with which the SU was associated, will forward the SNAP messages
to all other SUs associated with them.
The default is Disable.
4.2.6.4.9 Ports Control (SU only)
The Ports Control sub-menu includes the Ethernet Port Control option:
4.2.6.4.9.1 Ethernet Port Control
The Ethernet Port Control option allows enabling or disabling non-management
traffic to/from the Ethernet port. When changed to Disable, all current data
sessions will be terminated. The unit is still manageable via the Ethernet port
even if it is disabled for data traffic.
The default selection is Enable.
4.2.6.4.10 Show Bridge Parameters
The Show Bridge Parameters option displays the current values of the Bridge
parameters.