User's Manual

Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
134
4.2.6.2.8.1.2 Show Transmit Power Parameters
This option displays the Transmit Power parameter and the current transmit
power for the different modulation levels.
4.2.6.2.8.2 Maximum Transmit Power (SU only)
The Maximum Transmit Power submenu includes the following options:
 Maximum Tx Power
 Show Maximum Tx Power Parameters
4.2.6.2.8.2.1 Maximum Tx Power
The Maximum Tx Power parameter limits the maximum transmit power that can
be reached by the ATPC algorithm. It also sets the upper limits for the Transmit
Power parameters.
The minimum value for the Maximum Tx Power is -10 dBm. The maximum value
depends on several unit properties and parameters:
 The HW revision of the unit
 The Maximum Allowed Tx Power as defined for the applicable Sub-Band.
 The Maximum EIRP as defined for the applicable Sub-Band, together with the
value of the Antenna Gain. In certain countries the Maximum EIRP of some
equipment types cannot exceed a certain value. In these cases the Transmit
Power cannot exceed the value of (Maximum EIRP – Antenna Gain).
For information on how to view the Sub-Bands supported by the unit and the
supported parameters’ values and options, refer to section 4.2.2.4
.
The unit calculates the maximum allowed Maximum Tx Power according to the
unit properties and parameters listed above, and displays the allowed range when
the Maximum Tx Power parameter is selected.
For each modulation level, the unit will use as maximum transmit power the
minimum between this parameter and the maximum Tx power allowed by the HW
and the Country Code for the specific modulation level.
The default Maximum Tx Power is the highest allowed value.
4.2.6.2.8.2.2 Show Maximum Tx Power Parameters
This option displays the Maximum Tx Power parameter and the current
maximum Tx power for the different modulation levels.