User's Manual

Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
118
 HwVer: the hardware version of the unit.
 CpldVer: The version of the Complex Programmable Logic Device (CPLD) used
in the unit. This parameter is available only in AUs, displaying the CPLD
version in the relevant SU.
 Country: The 3 or 4 digits country code supported by the unit.
 SwVer: The SW version used by the unit. This parameter is available only in
SUs, displaying the SW version in the relevant AU.
 BootVer: The Boot Version of the unit. This parameter is available only in
AUs, displaying the Boot version in the relevant SU.
4.2.5.6.2 Show Link Capability-Wireless Link Configuration
Select this option to view information on current wireless link parameters of
relevant units. For each relevant unit, identified by its MAC address, the following
details are displayed:
 ATPC Option: Enable or Disable.
 Adaptive Modulation Option: Enable or Disable.
 Burst Mode Option: Enable or Disable.
 DFS Option: Enable or Disable. This parameter is available only in SUs,
displaying the current option in the relevant AU.
 Concatenation Option: Enable or Disable.
 Country Code Learning by SU: Enable or Disable. This parameter is
available only in SUs, displaying the current option in the relevant AU.
 Per SU Distance Learning: Enable or Disable. This parameter is available
only in SUs, displaying the current option in the relevant AU.
4.2.5.6.3 Show Link Capability-Security Configuration
Select this option to view information on current security related parameters of
relevant units. For each relevant unit, identified by its MAC address, the following
details are displayed:
 Security Mode: WEP, AES OCB or FIPS 197.