User's Manual

Menus and Parameters
Operation and Administration
115
have "aged out".

The aging time specified for entries in these table. There is no aging time
for Association Info entries.

The maximum number of entries permitted for this table, which is
specified by the Maximum Number of Associations parameter. The
default value of the Maximum Number of Associations parameter is 512.
 Show MIR/CIR Database: Displays information on the MIR/CIR support for
associated Subscriber Units.
Each entry includes the following information:

The MAC address of the associated Subscriber Unit

The values of the MIR and CIR parameters configured in the applicable SU
for the downlink (AU to SU) and for the uplink (SU to AU).

The value configured in the applicable SU for the Maximum Delay
parameter.

The maximum data rate of the Subscriber Unit
 Display MAC Pinpoint Table: The MAC Pinpoint table provides for each of
the Ethernet stations (identified by the MAC Address) connected to either the
AU or to any of the SUs served by it, the identity (MAC Address) of the
wireless device to which they are connected.
 Gateways Table: When the DRAP option is supported, the Gateways Table
provides details on the active Gateways connected to any of the SUs served by
the AU. For each Gateway, the displayed information includes:

Gateway Type (VG-1D1V, VG-1D2V, NG-4D1W)

IP Address

Number of Voice Calls (applicable only to Voice Gateways)
4.2.5.4.2 MAC Address Database in SU
The MAC Address Database option in the SU displays information regarding the
Subscriber Units bridging (forwarding) information. The following option is
available: