User's Manual

Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
86
 Show Advanced Configuration
 Show Country Dependent Parameters
 Show All Parameters
4.2.2.1 Show Unit Status
The Show Unit Status menu is a read only menu that displays the current values
of the following parameters:
 Unit Name: As defined in the Unit Control menu.
 Unit Type: Identifies the unit's function: AU-BS, AU-SA, AUS-BS, AUS-SA,
SU-3-1D, SU-6-1D, SU-6-BD, SU-54-BD, SU-I.
 Unit MAC Address: The unit's unique IEEE MAC address.
 Current Number of Associations (AU only): The total number of SUs
associated with this AU. This number may include units that are not
currently active as there is no aging algorithm for associated SUs.
NOTE
An SU is only removed from the list of associated SUs under the following conditions:
 A SNAP frame is received from another AU indicating that the SU is now associated with the
other AU.
 The SU failed to respond to a certain number of consecutive frames transmitted by the AU and
is considered to have "aged out".
 Number of Associations Since Last Reset: For SUs - displays the total
number of associations with any AU since the last reset, including duplicate
associations with the same AU. For AUs - displays the number of SUs that
have associated with the AU since the last reset, including duplicate
associations with the same SU.
 Unit Status (SU only): The current status of the SU. There are two status
options:

SCANNING: The SU is searching for an AU with which to associate. If the
DFS Option is enabled and the SU is currently looking for its previous AU,
the AU’s MAC Address will be displayed.

ASSOCIATED: The SU is associated with an AU.