User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
252
MIB Parameter Description Value/Range
counters.
*TotalTxEvents
(*TxEvents 5)
Applicable to all units. The total number
of Tx events.
Counter 32
*RxEvents
(*WirelessLinkEvents 2)
Applicable to all units. Read-only. Rx
errors counters.
*PhyErrors
(*RxErrors 1)
Applicable to all units. Read-only. The
number of unidentified signals.
Counter 32
*CRCEvents
(*RxEvents 2)
Applicable to all units. Read-only. The
number of frames received from the
wireless medium containing CRC errors.
Counter 32
*OverrunEvents
(*RxEvents 3)
Applicable to all units. Read-only. The
number of frames that were discarded
because the receive rate exceeded the
processing capability or the capacity of
the Ethernet port.
Counter 32
*RxDecryptEvents
(*RxEvents 4)
Applicable to all units. Read-only. The
number of frames that were not received
properly due to a problem in the data
decryption mechanism.
Counter 32
*TotalRxEvents
(*RxEvents 5)
Applicable to all units. Read-only. The
total number of Rx events.
Counter 32
*PerModulationLevelCounters
(*TrafficStatistics 5)
Per Modulation Level Counters.
*ResetPerModulationLevelCounters
(*PerModulationLevelCounters 1)
Applicable to all units. Resets the Per
Modulation Level Counters
Integer
resetCounters (1)
cancel (2)
*SUPerModulationLevelCountersTable
(*PerModulationLevelCounters 2)
Applicable to SU/RB. Not accessible.
The Per Modulation Level Counters
Table.
*SUPerModulationLevelCountersEntry
(*PerModulationLevelCountersTable 1)
Applicable to SU/RB. Not accessible. An
entry in the Per Modulation Level
Counters Table.
*SUPerModulationLevelCountersTableIdx
(*PerModulationLevelCountersEntry 1)
Applicable to SU/RB. Read-only. The
index of an entry in the Per Modulation
Level Counters Table.
*SUPerModulationLevelCountersApplicable
ModulationLeve
(*PerModulationLevelCountersEntry 2)
Applicable to SU/RB. Read-only. The
modulation level applicable for the entry
in the Per Modulation Level Counters
Table.
Integer
Range: 1 to 8*
*Level 8 is not
applicable to devices
with HW revision A
*SUPerModulationLevelCountersTxSuccess
(*PerModulationLevelCountersEntry 3)
Applicable to SU/RB. Read-only. The
total number of successfully transmitted
unicasts at the applicable modulation
level.
Counter 32
*SUPerModulationLevelCountersTxFailed
(*PerModulationLevelCountersEntry 4)
Applicable to SU/RB. Read-only. The
total number of failures to successfully
transmit a unicast frame
during a HW Retry cycle at the
applicable modulation level.
Counter 32
*AverageModulationLevel
(*PerModulationLevelCounters 3)
Applicable to SU/RB. Read-only. The
average modulation level for successful
transmission (rounded to nearest
integer) since last reset of the Per
Modulation Level counters.
Integer
1-8.
*MacAddressDatabase
(*SiteSurvey 5)
MAC Address Database
*AUMacAddressDatabase
(*MacAddressDatabase 1)
AU MAC Address Database