User's Manual

breezeAccessVLMib
BreezeACCESS VL System Manual
251
MIB Parameter Description Value/Range
for transmission to the wireless medium.
*TotalNoOfDataFramesSubmitted
(*DataFramesSubmittedToBridge 4)
Applicable to all units. Read-only. The
total number of data frames submitted to
the internal bridge for transmission to
the wireless medium.
Counter 32
*TotalRecievedDataFrames
(*WirelessLinkCounters 6)
Applicable to all units. Read-only. The
total number of data frames received
from the wireless medium, including
duplicate frames.
Counter 32
*RecievedBadFrames
(*WirelessLinkCounters 7)
Applicable to all units. Read-only. The
number of frames received from the
wireless medium with errors (CRC
errors).
Counter 32
*NoOfDuplicateFramesDiscarded
(*WirelessLinkCounters 8)
Applicable to all units. Read-only. The
number of frames discarded due to
receiving multiple copies.
Counter 32
*InternallyDiscardedMirCir
(*WirelessLinkCounters 9)
Applicable to all units. Read-only. The
number of data frames received from
the Ethernet port that were discarded by
the MIR/CIR mechanism to avoid
exceeding the maximum allowed
information rate
Counter 32
*TotalRxConcatenatedFramesDouble
(*WirelessLinkCounters 10)
Applicable to all units Read-only. The
total number of double concatenated
frames that were received from the
wireless medium, including duplicate
frames.
Counter 32
*TotalRxConcatenatedFramesSingle
(*WirelessLinkCounters 11)
Applicable to all units Read-only. The
total number of single concatenated
frames that were received from the
wireless medium, including duplicate
frames.
Counter 32
*TotalRxConcatenatedFramesMore
(*WirelessLinkCounters 12)
Applicable to all units Read-only. The
total number of concatenated frames
with more than two data frames that
were received from the wireless
medium, including duplicate frames.
Counter 32
*WirelessLinkEvents
(*TrafficStatistics 4)
Applicable to all units. Wireless link
event counters.
*TxEvents
(*WirelessLinkEvents 1)
Applicable to all units. Read-only. Tx
event counters.
*DroppedFrameEvents
(*TxEvents 1)
Applicable to all units. The number
frames that were dropped because they
were retransmitted to the maximum
allowed number of retransmissions
without being acknowledged.
Counter 32
*FramesDelayedDueToSwRetry
(*TxEvents 2)
Applicable to all units. Not applicable for
units running SW version 3.0 and
higher. The number of frames that were
delayed because the SW retry algorithm
was activated on a previous frame
designated for the same recipient.
Counter 32
*Underrun Events
(*TxEvents 3)
Applicable to all units. The number of
frames whose transmission was aborted
because the rate of submitting frames
for transmission exceeds the available
transmission capability.
Counter 32
*OtherTxEvents
(*TxEvents 4)
Applicable to all units. The number of Tx
events due to problems other than those
represented by the other Tx Events
Counter 32