User's Manual

breezeAccessVLMib
BreezeACCESS VL System Manual
249
MIB Parameter Description Value/Range
(*PerformanceParams 11) Applicable to all units.
*ConcatenationOption
(*ConcatenationParameters 1)
Applicable to all units.
Enabling/disabling the
concatenation mechanism.
Integer
disable (1)
enable (2)
na (255)
*ConcatenationMaximumNumberOfFrames
(*ConcatenationParameters 2)
Applicable to all units. Not
applicable to units with SW version
4.0 and higher. Defines the
maximum number of data frames
that can be concatenated.
Integer
2 – 8
*ConcatenationMaxFrameSize
(*ConcatenationParameters 3)
Applicable to all units with SW
version 4.0 and higher. Defines the
maximum size of a concatenated
frame.
Integer
Range: 256 to 2200 (bytes)
for BU/RB-14 BU/RB-28,
or for AU/SU with HW
revision A or B.
256 to 4032 (bytes) for
AU/SU with HW Revision
C or higher and BU/RB-
100.
E.2.11 Site Survey Parameters
MIB Parameter Description Value/Range
*SiteSurvey
(breezeAccessVLMib 11)
*AverageReceiveSNR
(*SiteSurvey 1)
Applicable to SU/RB. Read-only. The
average Signal to Noise Ratio of
received frames.
Integer
*TrafficStatistics
(*SiteSurvey 2)
Applicable to all units. Traffic statistics
parameters.
*ResetTrafficCounters
(*TrafficStatistics 1)
Applicable to all units. Resets the traffic
counters.
Integer
reset (1)
cancel (2)
*EthCounters
(*TrafficStatistics 2)
Applicable to all units. Ethernet
counters.
*TotalRxFramesViaEthernet
(*EthCounters 1)
Applicable to all units. Read-only. Total
number of frames received via the
Ethernet port.
Counter 32
*TxWirelessToEthernet
(*EthCounters 2)
Applicable to all units. Read-only. Total
number of frames transmitted to the
Ethernet port.
Counter 32
*WirelessLinkCounters
(*TrafficStatistics 3)
Applicable to all units. Wireless link
counters.
*TxFramesToWireless
(*WirelessLinkCounters 1)
Transmitted frames counters
*AUBeaconsToWireless
(*TxFramesToWireless 1)
Applicable to AU/BU. Read-only. The
number of Beacon frames transmitted to
the wireless medium.
Counter 32
*DataAndOtherMngFramesToWireless
(*TxFramesToWireless 3)
Applicable to AU/BU. Read-only. The
number of data and other management
frames (excluding beacons) transmitted
to the wireless medium. The count
includes multicasts/broadcasts and one
count for each unicast frame transmitted
successfully (excluding
retransmissions).
Counter 32