User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
246
MIB Parameter Description Value/Range
*SecurityParams
(breezeAccessVLMib 9)
*AuthenticationAlgorithm
(*SecurityParameters 1)
Applicable to all units.
Enables/disables the
authentication encryption
option.
openSystem: Authentication
messages are not encrypted.
sharedKey : Authentication
messages are encrypted.
Integer
openSystem (1)
sharedKey (2)
*DefaultKey
(*SecurityParameters 2)
Applicable to SU/RB. The ID
of the key to be used for
encrypting/decrypting the
authentication messages.
Integer
Range: 1 to 4.
*DataEncryptionOption
(*SecurityParameters 3)
Applicable to all units.
Enables/disables the data
encryption option.
Integer
disable (1)
enable (2)
*DefaultMulticastKey
(*SecurityParameters 4)
Applicable to AU/RB. The ID
of the key to be used for
encrypting/decrypting
multicasts.
Integer
Range: 1 to 4.
*SecurityMode
(*SecurityParameters 5)
Applicable to all units. The
encryption algorithm to be
used for authentication
messages and/or data
encryption. The fips197 option
is applicable only to units with
HW revision C or higher,
provided they have a license
to use FIPS 197 algorithm.
Integer
wep (1)
aesOCB (2)
fips197 (3)
*PromiscuousAuthenticationMode
(*SecurityParameters 6)
Applicable to AU/RB.
Enabling/disabling the
promiscuous mode, where
any SU can be authenticated
by and communicate with the
AU.
Integer
disable (1)
enable (2)
*Key1
(*SecurityParameters 7)
Applicable to all units. Key
number 1. Accessible only
with SNMP Write Community
String (administrator
password).
DisplayString
32 hexadecimal
digits
*Key2
(*SecurityParameters 8)
Applicable to all units. Key
number 2. Accessible only
with SNMP Write Community
String (administrator
password).
DisplayString
32 hexadecimal
digits
*Key3
(*SecurityParameters 9)
Applicable to all units. Key
number 3. Accessible only
with SNMP Write Community
String (administrator
password).
DisplayString
32 hexadecimal
digits
*Key4
(*SecurityParameters 10)
Applicable to all units. Key
number 4. Accessible only
with SNMP Write Community
String (administrator
password).
DisplayString
32 hexadecimal
digits
*SecurityModeSupport
(SecurityParameters 12)
Applicable to all units. Returns
types of encryption that are
supported.
Integer (0..7)
No encryption (0)
WEP (1)
AES/OCB (2)