User's Manual

breezeAccessVLMib
BreezeACCESS VL System Manual
239
MIB Parameter Description Value/Range
will get Low priority,
otherwise the frame will get
High priority. Untagged
frames will get Low priority.
*TrafficPriIPToS
(*TrafficPrioritization 2)
ToS Prioritization
parameters. Applicable to all
units.
*ToSPrioritizationOption
(*TrafficPriIPToS 1)
Applicable to all units.
Disable/Enable IP ToS
prioritization and chooses
the interpretation of the IP
ToS field from IP header:
ipPrecedence(2): The IP
ToS field is defined by
RFC791. In this case the
prioritization will be done
using the Precedence sub-
field of IP ToS. This sub-
field has 3 bits, so it can be
between 0 and 7.
dSCP(3): The IP ToS field is
defined by RFC2474. In this
case the prioritization will be
done using the DSCP sub-
field. The size of the sub-
field is 6 bits, so the range is
0 to 63.
Integer
disable(1),
ipPrecedence(2),
dSCP(3)
*IPPrecedenceThreshold
(*TrafficPriIPToS 2)
Applicable to all units. The
threshold of Precedence
sub-field of IP ToS field from
IP Header (RFC791) to be
used when the ToS
Prioritization Option is set to
IP Precedence. If the
Precedence sub-field of a
frame is less than or equal
to this threshold the frame
will have Low priority,
otherwise it will get High
priority.
Integer
0-7
*IPDSCPThreshold
(*TrafficPriIPToS 3)
Applicable to all units. The
threshold of DSCP sub-field
of IP ToS field from IP
Header (RFC2474) to be
used when ToS
Prioritization Option is set to
DSCP. If the DSCP sub-field
of a frame is less than or
equal to this threshold the
frame will have Low priority,
otherwise it will get High
priority.
Integer
0-63
*TrafficPriUdpTcpPortRange
(*TrafficPrioritization 3)
UDP/TCP Port Ranges
Prioritization parameters.
Applicable to all units.
*UdpTcpPortRangePrioritizationOption
(*TrafficPriUdpTcpPortRange 1)
Applicable to all units.
Disable/Enable Prioritization
using UDP and/or TCP Port
Ranges.
udpOnly(2): prioritization will
Integer
disable(1),
udpOnly(2),
tcpOnly(3),
udpANDtcp(4)