User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
238
MIB Parameter Description Value/Range
Information Rate (CIR) from
SU to AU.
CIR must be below
brzaccVLMirUplink value.
SU-3 with SW version below
4.0: 0 – 2,048 (Kbps)
SU-3 with SW version 4.0 or
higher: 0 – 3,072 (Kbps)
SU-6 with SW version below
4.0: 0 – 3,968 (Kbps)
SU-6 with SW version 4.0 or
higher: 0 – 6,016 (Kbps)
SU-54: 0 – 45,056 (Kbps)
SU-I: 0 – 2,048 (Kbps)
The actual value (Get) will be
the entered value rounded to
the nearest multiple of 128
(N*128).
BreezeNET B products will
return 65535 for na.
*MaxDelay
(*ServiceParameters 6)
Applicable to SU only. Not
applicable to BreezeNET B
products. The maximal time
packets may be delayed by
the CIR\MIR mechanism.
Above the configured
maximal period the packets
are discarded.
Integer
Range: 300 - 10000
(milliseconds)
BreezeNET B products will
return 65535 for na.
*MaxBurstDuration
(*ServiceParameters 7)
Applicable to AU and SU.
Not applicable to
BreezeNET B products. The
maximum time during which
inactivity bonus time can be
accumulated for future burst
transmissions.
Integer
Range: 0 – 2000
(milliseconds)
BreezeNET B products will
return 65535 for na.
*GracefulDegradationLimit
(*ServiceParameters 8)
Applicable to AU only. Not
applicable to BreezeNET B
products. The maximum
limit for activating the
graceful degradation
algorithm.
Integer
Range: 0 – 70 (%)
na (255)
*MirOnlyOption
(*ServiceParameters 9)
Applicable only to AU. Not
applicable to BreezeNET B
products. When enabled, it
overrides the CIR/MIR
algorithm for determining
actual information rate and
forces the algorithm to
operate with MIR
parameters’ settings only.
When enabled, the Graceful
Degradation algorithm is
disabled.
Integer
disable (1)
enable (2)
na (255)
*TrafficPrioritization
(*ServiceParameters 10)
Traffic Prioritization
parameters. Applicable to all
units.
*VLTrafficPriVLAN
(*TrafficPrioritization 1)
VLAN Prioritization
parameters. Applicable to all
units.
*LANPriorityThreshold
(*VLTrafficPriVLAN 1)
Applicable to all units. If the
VLAN Priority's value of the
frame is less than or equal
to this threshold, the frame
Integer
0-7