User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
226
MIB Parameter Description Value/Range
*MaximumTxPowerRange
for the applicable modulation
level.
*MaximumTransmitPowerTable
(*AirInterface 6)
Applicable to SU /RB. Not
accessible. Maximum Transmit
Power parameters table.
*MaximumTransmitPowerEntry
(*TransmitPowerTable 1)
Applicable to SU/RB. Not
accessible. An entry in the Maximum
Transmit Power parameters table.
*MaximumTransmitPowerIdx
(*MaximumTransmitPowerEntry 1)
Applicable to SU/RB. Read-only. An
index of an entry in the Maximum
Transmit Power parameters table.
Integer
1-4
*MaxTxApplicableModulationLevel
(*MaximumTransmitPowerEntry 2)
Applicable to SU/RB. Read-only.
The applicable modulation level for
an entry in the Maximum Transmit
Power parameters table. Level 8 is
not applicable to units with HW
revision A.
Level1to5 (1)
Level6 (2)
Level7 (3)
Level8 (4)
*DefinedMaximumTxPowerRange
(*MaximumTransmitPowerEntry 3)
Applicable to SU/RB. Read-only.
The allowed range for the
*MaxTxPower parameter at the
applicable modulation level.
DisplayString
Range: -10 to the maximum
allowed for the applicable
modulation level.
*MaxTxPower
(*MaximumTransmitPowerEntry 4)
Applicable to SU/RB. Read-only for
units with SW version 4.0 and
higher.
The maximum transmit power level
that can be either configured for the
*TxPower parameter or reached by
the ATPC algorithm.
DisplayString
Range: -10 to the maximum
defined by the
*DefinedMaximumTxPowerR
ange for the applicable
modulation level.
*MaxNumOfAssociations
(*AirInterface 10)
Applicable to AU. Not applicable to
BreezeNET B products. The upper
limit for the number of Subscriber
Units that can be associated with the
AU.
Integer
AU-BS, AU-SA: 0-512 (0-124
if Data Encryption Option is
enabled).
AUS-BS, AUS-SA with SW
version 4.0 and higher: 0-8.
AUS-BS, AUS-SA with SW
version below 4.0: 0-5.
na (65535)
*BestAu
(*AirInterface 11)
Best AU/BU parameters. Applicable
to SU/RB.
*BestAuSupport
(*BestAu 1)
Applicable to SU/RB. Disable/enable
the Best AU/BU selection
mechanism
Integer
disable (1)
enable (2)
na (255)
*BestAuNoOfScanningAttempts
(*BestAu 2)
Applicable to SU/RB. The number of
scanning attempts to collect
information for the Best AU/BU
decision
Integer
1-255
*PreferredAuMacAddress
(*BestAu 3)
Applicable to SU only. The MAC
address of the preferred AU/BU
(overriding the Best AU/BU selection
process).
Mac Address
000000000000 means no
preferred AU
*NeighborAuTable
(*BestAu 4)
Applicable to SU/RB. Not
accessible. Neighboring AUs/BUs
table.
*NeighborAuEntry
(*NeighborAuTable 1)
Applicable to SU only. Not
accessible. An entry in the
Neighboring AUs table.
*NeighborAuIdx Applicable to SU/RB. Read-only. An Integer