User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
222
MIB Parameter Description Value/Range
(*VLANTrafficPriority 1) Priority tagging for data frames.
Applicable to Access Link only.
0 – 7
255-na
*VlanManagementPriority
(*VLANTrafficPriority 3)
Applicable to all units. Priority tagging for
management frames. Applicable to
Access Link and Trunk Link only.
Integer
0 – 7
255-na
*VlanPriorityThreshold
(*VLANTrafficPriority 4)
Applicable to all units. Not applicable to
units with SW version 3.1 and higher
where this parameter is replaced by
Priority threshold for tagged frames
received from Ethernet port. Applicable to
Hybrid Link and Trunk Link only.
Integer
0 – 7
255-na
*VLANQinQ
*VLANSupport 7
QinQ (Service Provider Link) parameters.
Not applicable to BreezeNET-B units.
*QinQEthertype
(*VLANQinQ 1)
Applicable to AU and SU. The Ethernet
type of the Service Provider tag
Integer
33024 (0x8100) – 36864
(0x9000),
37120 (0x9100),
37376 (0x9200)
*QinQProviderVlanID
(*VLANQinQ 2)
Applicable to SU only. VLAN ID of the
Service Provider tag.
Integer
1-4094
*BridgeAgingTime
(*BridgeParameters 2)
Applicable to all units. Bridge aging time
for devices learned from both the Ethernet
and wireless link ports.
Integer
20 – 2000 (seconds)
*BroadcastRelaying
(*BridgeParameters 4)
Applicable to AU only. Not applicable to
BreezeNET B products. Enables or
disables the relaying of broadcast
messages to the wireless link.
Integer
disable (1)
enable (2)
na (255)
*UnicastRelaying
(*BridgeParameters 5)
Applicable to AU only. Not applicable to
BreezeNET B products. Enables or
disables the relaying of unicast messages
to the wireless link.
Integer
disable (1)
enable (2)
na (255)
*EthBroadcastFiltering
(*BridgeParameters 6)
Applicable to SU/RB only. Enables or
disables the filtering of Ethernet (layer2)
broadcasts.
disable: No filtering.
onEthrnetOnly: Filters broadcasts
received on the Ethernet port only.
onWirelessOnly: Filters broadcasts
received on the wireless port only.
onBothWirelessAndEthernet: Filters
broadcasts received on both ports.
Integer
disable (1)
onEthernetOnly (2)
onwirelessOnly (3)
onBothWirelessAndEthe
rnet (4)
na (255)
*EthBroadcastingParameters
(*BridgeParameters 7)
*DHCPBroadcastOverrideFilter
(*EthBroadcastingParameters 1)
Applicable to SU/RB only. Enables or
disables the broadcasting of DHCP
messages, overriding the general
*EthBroadcastFiltering Ethernet broadcast
filtering option.
Integer
disable (1)
enable (2)
na (255)
*PPPoEBroadcastOverrideFilter
(*EthBroadcastingParameters 2)
Applicable to SU/RB only. Enables or
disables the broadcasting of PPPoE
messages, overriding the general
*EthBroadcastFiltering Ethernet broadcast
filtering option.
Integer
disable (1)
enable (2)
na (255)
*ARPBroadcastOverrideFilter
(*EthBroadcastingParameters 3)
Applicable to SU/RB only. Enables or
disables the broadcasting of ARP
messages, overriding the general
*EthBroadcastFiltering Ethernet broadcast
filtering option.
Integer
disable (1)
enable (2)
na (255)
*EthBroadcastMulticastLimiterOption
(*EthBroadcastingParameters 4)
Applicable to all units. Enable/disable the
limiter for multicast and broadcast
Integer
disable (1)