User's Manual

Installing the Universal IDU Indoor Unit

Installation

NOTE

The length of the Ethernet cable connecting the indoor unit to the user's equipment, together with

the length of the Indoor-to-Outdoor cable, should not exceed 100 meters.

2.4.1 RESET Button Functionality

Using a sharp object, press the recessed RESET button for a short time to reset

the unit and reboot from the Main version.

In units with ODU HW revision C and an IDU PS 1073, the RESET button can be

used for setting the unit to its factory defaults. Press the button for at least 5

seconds (until the ETH LED of the IDU stops blinking): the unit will reboot with

the factory default configuration.

NOTE

Reset the ODU using the RESET button on the IDU after connecting or reconnecting the indoor

and outdoor units with the indoor-to-outdoor cable.