User's Manual

Chapter 1 - System Description
BreezeACCESS VL System Manual
24
1.7.5.3.2 Connectors
Table 1-16: Connectors, Modular Base Station Equipment
Unit Connector Description
10/100 BaseT
10/100BaseT Ethernet (RJ-45) with 2 embedded LEDs.
Cable connection to a PC: crossed
Cable connection to a hub: straight
BS-AU
RADIO 10/100BaseT Ethernet (RJ-45) with 2 embedded LEDs
INDOOR
10/100BaseT Ethernet (RJ-45), protected by a waterproof
sealing assembly
AU-D-BS-ODU
ANT N-Type jack, 50 ohm, lightning protected
BS-PS-AC AC-IN 3-PIN AC power plug
BS-PS-DC -48 VDC
3 pin DC D-Type 3 power pins plug
Amphenol 717TWA3W3PHP2V4RRM6
Antenna RF N-Type jack (on a 1.5m cable in the Omni-8-5.8)
1.7.5.3.3 Electrical
Table 1-17: Electrical Specifications, Modular Base Station Equipment
Unit Details
General 240W max. for a fully equipped chassis (1 PS, 6 AU)
BS-PS-AC
AC power input: 85-265 VAC, 47-65 Hz
DC power output: 54 V; 3.3 V
BS-PS-DC
DC power input: -48 VDC nominal (-34 to -72), 10 A max
DC power output: 54 V; 3.3 V
BS-AU 3.3 VDC, 54 VDC from the power supply module(s) via the back plane
AU-D-BS-ODU 54 VDC from the BS-AU over the indoor-outdoor Ethernet cable
AU-D-BS (IDU+ODU) Power consumption: 30W
1.7.5.4 Standalone Access Unit
1.7.5.4.1 Mechanical