User's Manual

Chapter 1 - System Description
BreezeACCESS VL System Manual
8
For each ODU type, several models are available to support various end-users
needs and applications, as detailed in Table 1-4:
Table 1-4: SU-A/E Subscriber Unit Types
SU Type Description
SU-54-BD A high-rate CPE that supports a full LAN
SU-6-1D
A medium rate CPE that supports a single Ethernet device
(one MAC address)
SU-6-BD A medium rate CPE that supports a full LAN
SU-3-1D
An entry level CPE that supports a single Ethernet device
(one MAC address)
NOTE
Although the achievable throughput for SU-3/SU-6 is lower than that of SU-54, these units use all
modulation levels and may have bursts at up to 54 Mbps.
The IDU provides the interface to the user’s equipment and is powered from the
110/220 VAC mains. The customer's data equipment is connected via a standard
IEEE 802.3 Ethernet 10/100BaseT (RJ 45) interface. The indoor unit is
connected to the outdoor unit via a Category 5 Ethernet cable. This cable carries
Ethernet traffic between the indoor and the outdoor units, and also transfers
power (54 VDC) and control from the indoor unit to the outdoor unit.
1.3.2 SU-I Subscriber Units
The SU-I is a compact Subscriber Unit intended for indoor
installations by a non-professional user. The SU-I connects
to a detached wall/window mountable antenna, and is
available in the following configurations:
SU-A-ODU and IDU
New SU-A-ODU