User's Manual

Parameters Summary
BreezeACCESS VL System Manual
269
Parameter Unit Range Default Run-Time
 Enable
MAC Address List AU Up to 100 MAC addresses None (empty) Yes
MAC Address List Action AU
 Deny
 Allow
Deny Yes
Roaming Option SU
 Disable
 Enable
Disable No
Ethernet Port Control SU
 Disable
 Enable
Enable Yes
F.1.6 Performance Parameters
Parameter Unit Range Default Run-Time
RTS Threshold AU, SU 20 – 4032 (bytes) AU: 4032
SU: 60
Yes
Minimum Contention Window AU, SU 0, 7, 15, 31, 63, 127, 255, 511,
1023
15 Yes
Maximum Contention
Window
AU, SU 7, 15, 31, 63, 127, 255, 511,
1023
1023 Yes
Maximum Modulation Level AU, SU According to the Min/Max
Modulation Level defined for
the Sub-Band
The highest available
value
Yes
Multicast Modulation Level AU According to the Min/Max
Modulation Level defined for
the Sub-Band
The lowest available
value
Yes
Number of HW Retries AU, SU 1 - 14 10 Yes
Average SNR Memory
Factor
AU, SU -1 to 32 5 Yes
Burst Mode Option* AU, SU
 Disable
 Enable
Enable No
Burst Mode Time Interval* AU, SU 1 to the value defined in the
Sub-Band for Maximum Burst
Duration (milliseconds)
5 milliseconds or the
value of Maximum
Burst Duration
defined for the Sub-
Band (the lower of the
two values).
Yes
Adaptive Modulation Option AU, SU
 Disable
 Enable
Enable No
Minimum Interval Between
Adaptive Modulation
Messages
AU, SU 1-3600 (seconds) 4 (seconds) Yes
Adaptive Modulation
Decisión Threshold
AU, SU
 Normal
 High
Normal No
Concatenation Option AU, SU
 Disable
 Enable
Enable No
Maximum Concatenated
Frame Size
AU, SU  256 to 2200 bytes for units
with HW revision A or B
 256 to 4032 bytes for units
with HW revision C or
higher
 2200 for units
with rev A or B
 4032 for units
with rev C or
higher
Yes