User's Manual

Appendix F - Parameters Summary
BreezeACCESS VL System Manual
268
Parameter Unit Range Default Run-Time
SNMP Traps Community AU, SU Up to 14 printable ASCII
characters
public
(all 10 entries)
No
AP Client IP Address SU IP address 0.0.0.0 (none) Yes
F.1.5 Bridge Parameters
Parameter Unit Range Default Run-Time
VLAN ID-Data SU 1 – 4094 1 No
VLAN ID – Management AU, SU 1 – 4094, 65535 65535 (no VLAN) No
VLAN Link Type AU, SU
 Hybrid Link
 Trunk Link
 Access Link (only in SU)
 Service Provider Link
Hybrid Link No
VLAN Forwarding Support AU, SU Disable, Enable Disable No
VLAN Forwarding ID AU, SU 1 – 4094
(up to 20 entries)
Empty list No
VLAN Relaying Support AU Disable, Enable Disable No
VLAN Relaying ID AU 1 – 4094
(up to 20 entries)
Empty list No
VLAN Priority – Data SU 0 – 7 0 No
VLAN Priority –
Management
AU, SU 0 – 7 0 No
VLAN QinQ Protocol
Ethertype
AU, SU 8100 – 9000, 9100, 9200 (hex) 8100 (hex) No
Service Provider VLAN ID SU 1 – 4094 1 No
Ethernet Broadcast Filtering
Options
SU
 Disable,
 On Ethernet Port Only
 On Wireless Port Only
 On Both Wireless and
Ethernet Ports
Disable Yes
DHCP Broadcast Override
Filter
SU
 Disable
 Enable
Disable Yes
PPPoE Broadcast Override
Filter
SU
 Disable
 Enable
Disable Yes
ARP Broadcast Override
Filter
SU
 Disable
 Enable
Enable Yes
Ethernet Broadcast/Multicast
Limiter Option
AU, SU
 Disable
 Limit only Broadcast
Packets
 Limit Multicast Packets that
are not Broadcasts
 Limit All Multicast Packets
(including broadcast)
Disable Yes
Ethernet Broadcast/Multicast
Limiter Threshold
AU, SU 0 – 204800 (packets/second) 50 Yes
Ethernet Broadcast/Multicast
Limiter Send Trap Interval
AU, SU 1 – 60 (minutes) 5 (minutes) Yes
Bridge Aging Time AU, SU 20 – 2000 seconds 300 No
Broadcast Relaying AU Disable, Enable Enable No
Unicast Relaying AU
 Disable
Enable No