User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
258
E.3 Supported Traps
NOTE
An * is used instead of the brzaccVL prefix.
E.3.1 Trap Variables
MIB Parameter Description Value/Range
*Traps
(breezeAccessVLMib 14)
*TrapSUMacAddr
(*Traps 1)
Applicable to AU/BU. An SU/RB MAC
address.
MAC address
*TrapText
(*Traps 3)
Applicable to all units. Textual string for
future use.
DisplayString
*TrapToggle
(*Traps 4)
Applicable to all units. An On/Off toggle
status.
Integer
on (1)
off (2)
*TrapParameterChanged
(*Traps 5)
Applicable to all units. A modification to one
of the parameters related to IP Filtering,
MIR/CIR or VLAN.
Integer
cirOrMir (1)
ipFilter (2)
vlan (3)
*TrapAccessRights
(*Traps 6)
Applicable to all units. The access rights
used for login.
Integer
notLoggedIn (1)
readOnly (2)
installer (3)
administrator (4)
factory (5)
*TrapLog
(*Traps 7)
Applicable to all units. Login or logout to the
Monitor program Telnet.
Integer
telnetLogin (1)
telnetLogout (2)
*TrapTelnetUserIpAddress
(*Traps 8)
Applicable to all units. The IP address of a
Telnet user.
IP address
*TrapRTx
(*Traps 9)
Applicable to AU/BU. Retransmissions rate.
*TrapFtpOrTftpStatus
(*Traps 10)
Applicable to all units.
The status of the last FTP/TFTP loading
process.
successful (1)
failed (2)
*TrapDFSMoveFreq
(*Traps 11)
Applicable to AU/BU with HW revision B
and lower (for units with HW revision C and
higher replaced by *TrapDFSMoveFreq
New to support a resolution of 0.5 MHz).
The new frequency in MHz after detecting
radar on a previous channel.
Integer
*TrapDFSMoveFreqNew
(*Traps 12)
Applicable to AU/BU. The new frequency in
MHz after detecting radar on a previous
channel. (Replaces *TrapDFSMoveFreq to
support a resolution of 0.5 MHz for units
with HW revision C and higher).
DisplayString
*EthBroadcastThresholdExceeded
(*Traps 13)
Applicable to all units. The number of
packets that were dropped by the Ethernet
broadcast/multicast limiter.
Integer
*TrapSubscriberType
(*Traps 14)
Applicable to AUS only. The type of
subscriber that was rejected by the AUS
(AUS can serve up to 8 SUs. Only SU-3,
Integer
unknownSubscriberType(0),
su-3(3)