User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
256
MIB Parameter Description Value/Range
relevant SU/RB. enable (2),
na(255)
*AdbSecurityMode
(*AUAdbEntry 41)
Applicable to AU/BU. Read-only. The
current Security Mode of the relevant
SU/RB.
Integer
wep (1),
aesOCB (2),
fips197 (3)
na(255)
*AdbAuthOption
(*AUAdbEntry 42)
Applicable to AU/BU. Read-only. The
current Authentication Algorithm Option
of the relevant SU/RB.
Integer
openSystem(1),
sharedKey (2),
na(255)
*AdbDataEncryptOption
(*AUAdbEntry 43)
Applicable to AU/BU. Read-only. The
current Data Encryption Option of the
relevant SU/RB.
Integer
disable (1),
enable (2),
na(255)
*AdbAge
(*AUAdbEntry 44)
Applicable to AU/BU. Read-only. The
time in seconds elapsed since receiving
the last packet from the relevant SU/RB.
Integer
*AdbUnitName
(*AUAdbEntry 45)
Applicable to AU/BU. Read-only. The
Unit Name of the relevant SU/RB.
DisplayString
*UpLinkQualityIndicator
(*SiteSurvey 6)
UpLink quality Indicator (LQI)
parameters. Applicable only to SU/RB.
*MeasureUpLinkQualityIndicator
(*UpLinkQualityIndicator 1)
Applicable to SU/RB. Starts calculation
of LQI. The calculation will be for a
period of 10 seconds.
Integer
start (1),
cancel (2)
*ReadUpLinkQualityIndicator
(*UpLinkQualityIndicator 2)
Applicable to SU/RB. Read-only. The
results of the last LQI calculation.
Integer
1-8.
*UpLinkQualityIndicatorStatus
(*UpLinkQualityIndicator 3)
Applicable to SU/RB Only. Indicates the
test conditions. fullTest means that there
are no limitations on the range of
available modulation levels, and that all
modulation levels from 1 to 8 can be
used. limitedTest indicates that the
results may not indicate the true quality
since the available range is limited - by
HW (HW Revision A), or by the
applicable parameters in the country
code, or by the configurable Maximum
Modulation Level parameter.
Integer
fullTest (1),
limitedTest (2)
*MacPinpoint
(*SiteSurvey 7)
Applicable to AU/BU. MAC Pinpoint
parameters.
*MacPinpointTable
(*MacPinpoint 1)
Applicable to AU/BU. MAC Pinpoint
table. Not accessible.
*MacPinpointEntry
(MacPinpointTable 1)
Applicable to AU/BU. An entry in the
MAC Pinpoint table. Not accessible.
Each entry contains an Ethernet station
MAC address and the MAC address of
the wireless device used to connect it to
the wireless network
MptEthernetStationMACAddress
(*MacPinpointEntry 1)
Applicable to AU/BU only. Read only.
The MAC address of the Ethernet
station. It is used as an index in the
MAC Pinpoint Table.
MAC address
MptUnitMACAddress
(*MacPinpointEntry 2)
Applicable to AU/BU only. Read only.
The MAC address of the wireless device
used by the station with the MAC
Address from the index in order to
access the wireless network
MAC address
*DrapGatewaysTable
(*SiteSurvey 8)
DRAP Gateways table. Not accessible.
Applicable only to AU with DRAP