User's Manual

breezeAccessVLMib
BreezeACCESS VL System Manual
253
MIB Parameter Description Value/Range
*AdbResetAllCounters
(*AUMacAddressDatabase 1)
Applicable to AU/BU. Resets all the
counters for all SUs in the MAC Address
Database.
Integer
reset (1)
noReset (2)
*AUAdbTable
(*AUMacAddressDatabase 2)
Applicable to AU/BU. Not accessible.
The AU MAC Address Database Table.
*AUAdbEntry
(*AUAdbTable 1)
Applicable to AU/BU. Not accessible. An
entry in the AU MAC Address Database
Table.
*AdbIndex
(*AUAdbEntry 1)
Applicable to AU/BU. Read-only. The
Index of an entry in the AU MAC
Address Database Table.
Integer
*AdbMacAddress
(*AUAdbEntry 2)
Applicable to AU/BU. Read-only. The
MAC Address of an SU entry in the AU
MAC Address Database Table.
MAC Address
*AdbStatus
(*AUAdbEntry 3)
Applicable to AU/BU. Read-only. The
wireless status of the relevant SU.
Integer
associated (1)
authenticated (2)
notAuthenticated (3)
*AdbSwVersion
(*AUAdbEntry 4)
Applicable to AU/BU. Read-only. The
SW Version of the relevant SU.
Display String
*AdbSNR
(*AUAdbEntry 5)
Applicable to AU/BU. Read-only. The
average Signal to Noise Ratio in dB of
frames received by the AU from the
relevant SU.
Integer
0-60
*AdbMaxModulationLevel
(*AUAdbEntry 6)
Applicable to AU/BU. Read-only. The
value configured in the relevant SU for
the Maximum Modulation Level
parameter.
Integer
Range: 1 to 8*
*Level 8 is not
applicable to devices
with HW revision A.
*AdbTxFramesTotal
(*AUAdbEntry 7)
Applicable to AU/BU. Read-only. Counts
the total number of frames (excluding
retransmissions) that were transmitted
by the AU to the relevant SU.
Counter 32
*AdbDroppedFramesTotal
(*AUAdbEntry 8)
Applicable to AU/BU. Read-only. Counts
the total number of intended to the
relevant SU that were dropped because
they were retransmitted by the AU to the
extent of the maximum allowed number
of retransmissions without being
acknowledged.
Counter 32
*AdbTxSuccessModLevel1
(*AUAdbEntry 9)
Applicable to AU/BU. Read-only. Counts
the total number of unicast frames
(excluding retransmissions) that were
successfully transmitted to the SU over
the wireless link using modulation level
1.
Counter 32
*AdbTxSuccess ModLevel2
(*AUAdbEntry 10)
Applicable to AU/BU. Read-only. Counts
the total number of unicast frames
(excluding retransmissions) that were
successfully transmitted to the SU over
the wireless link using modulation level
2.
Counter 32
*AdbTxSuccess ModLevel3
(*AUAdbEntry 11)
Applicable to AU/BU. Read-only. Counts
the total number of unicast frames
(excluding retransmissions) that were
successfully transmitted to the SU over
the wireless link using modulation level
3.
Counter 32
*AdbTxSuccess ModLevel4 Applicable to AU/BU. Read-only. Counts Counter 32