User's Manual

breezeAccessVLMib
BreezeACCESS VL System Manual
247
MIB Parameter Description Value/Range
WEP + AES/OCB
(3)
FIPS-197 (4)
WEP + FIPS-197 (5)
AES/OCB + FIPS-
197 (6)
WEP + AES/OCB +
FIPS-197 (7)
E.2.10 Performance Parameters
MIB Parameter Description Value/Range
*PerformanceParams
(breezeAccessVLMib 10)
*RTSThreshold
(*PerformanceParams 1)
Applicable to SU and AU. Not
applicable to BreezeNET B
products. The minimum frame size
that requires an RTS/CTS
handshake.
Integer
20-4032 (bytes)
(20-1600 for units running
SW version below 3.0, 20-
3400 for units with SW
version 3.0)
na (65535)
*MinContentionWindow
(*PerformanceParams 3)
Applicable to SU, AU, BU-100 and
RB-100. The initial value to be
used by the contention window
calculation algorithm. A value of 0
disables the back-off algorithm.
Integer
0, 7, 15, 31, 63, 127, 255,
511, 1023.
na (65535)
BU/RB-14/28 will return
65535
*MaxContentionWindow
(*PerformanceParams 4)
Applicable to SU, AU, BU-100 and
RB-100. The maximum value to be
used by the contention window
calculation algorithm.
Integer
7, 15, 31, 63, 127, 255,
511, 1023
na (65535)
BU/RB-14/28 will return
65535
*MaximumModulationLevel
(*PerformanceParams 5)
Applicable to all units. If the
Adaptive Modulation algorithm is
enabled, it sets the maximum
modulation level to be used. If The
Adaptive Modulation algorithm is
disabled, it set the fixed modulation
level to be used.
Integer
Range: 1 to 8*
*Range depends on HW
version and Min/Max
Modulation Levels as
defined by Sub-Band.
*MulticastModulationLevel
(*PerformanceParams 6)
Applicable to AU/BU. The
modulation level for multicast and
broadcast data frames.
Integer
Range: 1 to 8*
*Range depends on HW
version and Min/Max
Modulation Levels as
defined by Sub-Band.
*AvgSNRMemoryFactor
(*PerformanceParams 7)
Applicable to all units. The weight
of history in average RSSI
calculation for the ATPC (AU only)
and Adaptive Modulation algorithm.
The higher is the value, the higher
is the weight of history
DisplayString
-1 (Disregard History) to 32
*HardwareRetries
(*PerformanceParams 8)
Applicable to all units. Not
applicable if Wireless Link
Prioritization is enabled. The
maximum number of trials to
Integer
1-14 for units with SW
version 4.0 and higher.
1-15 for units with SW