User's Manual

breezeAccessVLMib
BreezeACCESS VL System Manual
241
MIB Parameter Description Value/Range
ranges using a comma to
separate between ranges.
Example: 10-26,99,987-900.
*UdpPortRangeDelete
(*UdpPortRangeConfig 5)
Applicable to all units.
Delete port range(s) from
UDP Port Ranges Table.
Get operation will return an
empty string.
DisplayString
A range is defined by
<start>-<end> or <start>,
where <start> is the Start
Port of the range and <end>
is the End Port. If only
<start> is specified the range
is <start>-<start>. The value
of <start> and <end> are
between 0 and 65535.
The user can delete several
ranges using a comma to
separate between ranges.
Example: 10-26,99,987-900.
*UdpPortRangeDeleteAll
(*UdpPortRangeConfig 6)
Applicable to all units.
Delete all entries form UDP
Port Ranges Table. Get
operation will return 1
Integer
deleteAll(1),
cancelOperation (2)
*TcpPortRangeConfig
(*TrafficPriUdpTcpPortRange 3)
UDP Port Range
parameters. Applicable to all
units.
*TcpPortPriRTPRTCP
(*TcpPortRangeConfig 1)
Applicable to all units.
RTP/RTCP ports
prioritization option for TCP
packets.
rtpANDrtcp(1): the possible
RTP and RTCP packet with
destination port in the
defined port ranges will get
High priority.
rtpOnly(2): only possible
RTP packet (packet with
even destination port) with
destination port in the
defined port ranges will get
High priority.
Integer
rtpANDrtcp(1),
rtpOnly(2)
*TcpPortRangeNum
(*TcpPortRangeConfig 2)
Applicable to all units. Read-
only. The number of entries
in the TCP Port Range
Table.
Integer
*TcpPortRangeTable
(*TcpPortRangeConfig 3)
Applicable to all units. Not
accessible. A table of TCP
port ranges used for
prioritization. The user can
define up to 64 ranges. An
entry is empty if start is
65535 and end is 0.
*TcpPortRangeEntry
(*TcpPortRangeTable 1)
Applicable to all units. Not
accessible. A TCP Port
Ranges Table entry.
*TcpPortRangeStart
(*TcpPortRangeEntry 1)
Applicable to all units. Read-
only. Start port of an TCP
Port Range
Integer
0-65535
*TcpPortRangeEnd
(*TcpPortRangeEntry 2)
Applicable to all units. Read-
only. End port of an TCP
Port Range
Integer
0-65535
*TcpPortRangeIdx Applicable to all units. Read- Integer