User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
240
MIB Parameter Description Value/Range
be done only for UDP
packets
tcpOnly(3): prioritization will
be done only for TCP
packets
udpANDtcp(4): prioritization
will be done for UDP and
TCP packets
*UdpPortRangeConfig
(*TrafficPriUdpTcpPortRange 2)
UDP Port Range
parameters. Applicable to all
units.
*UdpPortPriRTPRTCP
(*UdpPortRangeConfig 1)
Applicable to all units.
RTP/RTCP ports
prioritization option for UDP
packet.
rtpANDrtcp(1): the possible
RTP and RTCP packet with
destination port in the
defined port ranges will get
High priority.
rtpOnly(2): only possible
RTP packet (packet with
even destination port) with
destination port in the
defined port ranges will get
High priority.
Integer
rtpANDrtcp(1),
rtpOnly(2)
*UdpPortRangeNum
(*UdpPortRangeConfig 2)
Applicable to all units. Read-
only. The number of entries
in the UDP Port Range
Table.
Integer
*UdpPortRangeTable
(*UdpPortRangeConfig 3)
Applicable to all units. Not
accessible. A table of UDP
port ranges used for
prioritization. The user can
define up to 64 ranges. An
entry is empty if start is
65535 and end is 0.
*UdpPortRangeEntry
(*UdpPortRangeTable 1)
Applicable to all units. Not
accessible. A UDP Port
Ranges Table entry.
*UdpPortRangeStart
(*UdpPortRangeEntry 1)
Applicable to all units. Read-
only. Start port of an UDP
Port Range
Integer
0-65535
*UdpPortRangeEnd
(*UdpPortRangeEntry 2)
Applicable to all units. Read-
only. End port of an UDP
Port Range
Integer
0-65535
*UdpPortRangeIdx
(*UdpPortRangeEntry 3)
Applicable to all units. Read-
only. Index of an UDP Port
Range entry
Integer
1-64
*UdpPortRangeAdd
(*UdpPortRangeConfig 4)
Applicable to all units. Add
port range(s) to UDP Port
Ranges Table.
Get operation will return an
empty string.
DisplayString
A range is defined by
<start>-<end> or <start>,
where <start> is the Start
Port of the range and <end>
is the End Port. If only
<start> is specified the range
is <start>-<start>. The value
of <start> and <end> are
between 0 and 65535.
The user can add several