User's Manual

breezeAccessVLMib
BreezeACCESS VL System Manual
235
MIB Parameter Description Value/Range
unit is automatically reset upon
activation.
activateNow (2)
*SpectrumAnalysisStatus
(*SpectrumAnalysisParameters 5)
Applicable to all units. Read-only.
Indicates whether the unit is
currently performing a spectrum
analysis process.
Integer
inactive (1),
currentlyActive (2)
*ResetSpectrumCounters
(*SpectrumAnalysisParameters 6)
Applicable to all units. Resets the
spectrum analysis counters.
Integer
cancelOperation (1),
resetCounters (2)
*SpectrumAnalysisInformationTable
(*SpectrumAnalysisParameters 7)
Applicable to all units. Not
accessible. The spectrum analysis
information table.
*SpectrumAnalysisInformationEntry
(*SpectrumAnalysisInformationTable 1)
Applicable to all units. Not
accessible. An entry in the spectrum
analysis information table.
*SpectrumAnalysisInformationTableIdx
(*SpectrumAnalysisInformationEntry 1)
Applicable to all units. Read-only. A
table index for a Spectrum Analysis
Information Entry in the
Spectrum Analysis Information
Table.
*SpectrumAnalysisInformationChannel
(*SpectrumAnalysisInformationEntry 2)
Applicable to all units. Read-only.
The channel’s frequency of the
relevant entry in the Spectrum
Analysis Information Table.
DisplayString
*SpectrumAnalysisInformationSignalCou
nt
(*SpectrumAnalysisInformationEntry 3)
Applicable to all units. Read-only.
The number of signals (excluding
OFDM frames) detected in the
channel.
Integer
*SpectrumAnalysisInformationSignalSNR
(*SpectrumAnalysisInformationEntry 4)
Applicable to all units. Read-only.
The approximate SNR of the signals
(excluding OFDM frames) detected
in the relevant channel.
Integer
*SpectrumAnalysisInformationSignalWidt
h
(*SpectrumAnalysisInformationEntry 5)
Applicable to all units. Read-only.
The average width in microseconds
of the signals (excluding OFDM
frames) detected in the relevant
channel.
Integer
*SpectrumAnalysisInformationOFDMFra
mes
(*SpectrumAnalysisInformationEntry 6)
Applicable to all units. Read-only.
The number of OFDM frames
received in the relevant channel.
Integer
* MaxNumOfAssociationsLimit
(*AirInterface 19)
Applicable to AU only. Not
applicable to BreezeNET B
products. Shows the limit for the
number of SUs that can be
associated with the AU.
Integer
AU-BS, AU-SA: If Data
Encryption is enabled, the
upper limit is 124. Otherwise
it is 512.
AUS-BS, AUS-SA with SW
version below 4.0: 5.
AUS-BS, AUS-SA with SW
version 4.0 and higher: 8
BreezeNET B products
return 65535.
*Disassociate
(*AirInterface 20)
Disassociation parameters.
*DisassociateAllSUs
(*Disassociate 1)
Applicable to AU. Disassociate ass
SUs.
Integer
cancelOperation (1),
disassociateAllSUs (2)
*DisassociateSuByMacAddress
(*Disassociate 2)
Applicable to AU. Disassociate
specified SU.
MacAddress
*TxControl
(*AirInterface 21)
Applicable to AU/BU. Enables to turn
the transmitter Off and On. If set to
Integer
on(1)