User's Manual

Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
180
4.2.6.6.2.2 MIR: Uplink (SU only)
Sets the Maximum Information Rate of the up-link from the SU to the AU. The
MIR value cannot be lower than the corresponding CIR value.
Available values range and default value are shown in Table 4-12.
The actual value will be the entered value rounded to the nearest multiple of 128
(N*128).
4.2.6.6.2.3 CIR: Downlink (SU only)
Sets the Committed Information Rate of the downlink from the AU to the SU. The
CIR value cannot be higher than the corresponding MIR value.
Available values range and default value are shown inError! Reference source
not found..
The actual value will be the entered value rounded to the nearest multiple of 128
(N*128).
4.2.6.6.2.4 CIR: Uplink (SU only)
Sets the Committed Information Rate of the uplink from the SU to the AU. The
CIR value cannot be higher than the corresponding MIR value.
Available values range and default value are shown inError! Reference source
not found..
The actual value will be the entered value rounded to the nearest multiple of 128
(N*128).
Table 4-12: MIR Ranges and Defaults
MIR Uplink MIR Downlink
Unit
Type
Range (Kbps) Default (Kbps) Range (Kbps) Default (Kbps)
SU-3 128-2,048 2,048 128-3,072 3,072
SU-6 128-4,096 4,096 128-6,016 6,016
SU-54 128-53,888 32,896 128-53,888 32,896
SU-I 128-2,048 2,048 128-6,016 6,016