User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
228
MIB Parameter Description Value/Range
AU/BU associated with the entry in
the Neighboring AU/BU Table.
enable (2),
na (255)
*NeighborAuConcatenationOption
(*NeighborAuEntry 15)
Applicable to SU/RB. Read-only.
The current Concatenation Option of
the AU/BU associated with the entry
in the Neighboring AU/BU Table.
Integer
disable (1),
enable (2),
na (255)
*NeighborAuLearnCountryCodeBySU
(*NeighborAuEntry 17)
Applicable to SU. Not applicable for
BreezeNET Band BreezeACCESS
products. Read-only. The current
Country Code Learning by SU option
of the AU associated with the entry
in the Neighboring AU Table.
Integer
disable (1),
enable (2),
na (255)
*NeighborAuSecurityMode
(*NeighborAuEntry 18)
Applicable to SU/RB. Read-only.
The current Security Mode of the
AU/BU associated with the entry in
the Neighboring AU/BU Table.
Integer
wep (1),
aesOCB (2),
fips197 (3),
na (255)
*NeighborAuAuthOption
(*NeighborAuEntry 19)
Applicable to SU/RB. Read-only.
The current Authentication algorithm
of the AU/BU associated with the
entry in the Neighboring AU/BU
Table.
Integer
openSysteme (1),
sharedKey (2),
na (255)
*NeighborAuDataEncyptOption
(*NeighborAuEntry 20)
Applicable to SU/RB. Read-only.
The current Data Encryption option
of the AU/BU associated with the
entry in the Neighboring AU/BU
Table.
Integer
disable (1),
enable (2),
na (255)
*NeighborAuPerSuDistanceLearning
(*NeighborAuEntry 21)
Applicable to SU. Read-only. The
current Per SU Distance Learning
option of the AU associated with the
entry in the Neighboring AU Table.
Integer
disable (1),
enable (2),
na (255)
*FrequencyDefinition
(*AirInterface 12)
Frequency Definition parameters
*SubBandLowerFrequency
(*FrequencyDefinition 1)
Applicable to SU/RB. Not applicable
to units with SW version 2.0 or
higher. The lowest frequency in the
subset to be used for scanning.
For 5.8 GHz products the range is
5740 to 5830 MHz using a 10 MHz
resolution.
For 4.9GHz products the range is
4920 to 5080 MHz using a 10 MHz
resolution.
For HW Revision C and above this
leaf is not relevant - shall return 0.
Integer
*SubBandUpperFrequency
(*FrequencyDefinition 2)
Applicable to SU/RB. Not applicable
to units with SW version 2.0 or
higher. The lowest frequency in the
subset to be used for scanning.
For 5.8 GHz products the range is
5740 to 5830 MHz using a 10 MHz
resolution.
For 4.9G Hz products the range is
4920 to 5080 MHz using a 10 MHz
resolution.
For HW Revision C and above this
leaf is not relevant - shall return 0.
Integer
*ScanningStep
(*FrequencyDefinition 3)
Applicable to all units - For flexible
Sub-Bands only. For units
with version 2.0 and above this is a
Integer
mhz-5 (1),
mhz-10 (2),