User's Manual

breezeAccessVLMib
BreezeACCESS VL System Manual
219
MIB Parameter Description Value/Range
*DeleteOneTrapAddr
(*NwMngParameters 8)
Applicable to all units. Deletes a
single selected entry from the
Management Trap Table.
Integer
cancelOperation (0)
deleteEntry (1…10)
na (255)
*DeleteAllTrapAddrs
(*NwMngParameters 9)
Applicable to all units. Deletes all
entries from the Management
Trap Table.
Integer
deleteAll (1)
cancelOperation (2)
na (255)
*MngIpRangesTable
(*NwMngParameters 10)
Applicable to all units. A table of
Management IP Address
Ranges. Not accessible.
*MngIpRangesEntry
(*MngIpRangesTable 1)
Applicable to all units. An entry
in the table of Management IP
Address Ranges. Not accessible.
*MngIpRangeIdx
(*MngIpRangesEntry 1)
Applicable to all units. Index of
an entry in the IP Address
Ranges Table.
Integer
1-10
*MngIPRangeFlag
(*MngIpRangesEntry 2)
Applicable to all units. Defines
the method of defining the range:
Using Start & End Addresses
(rangeDefinedByStartEndAddr),
or using Start Address and Mask
(rangeDefinedByStartAddrMask
Integer
rangeDefinedByStartEndAddr(1),
rangeDefinedByStartAddrMask(2)
*MngIpRangeStart
(*MngIpRangesEntry 3)
Applicable to all units. Start
Address of the range.
IP address
*MngIpRangeEnd
(*MngIpRangesEntry 4)
Applicable to all units. End
Address of the range. Used only
if brzaccVLMngIPRangeFlag is
rangeDefinedByStartEndAddr
IP address
*MngIpRangeMask
(*MngIpRangesEntry 5)
Applicable to all units. The
subnet mask of the range. Used
only if
brzaccVLMngIPRangeFlag is
rangeDefinedByStartAddrMask.
IP address
*DeleteOneNwIpRange
(*NwMngParameters 11)
Applicable to all units. Deletes a
single selected entry from the
Management IP Ranges Table.
Integer
cancelOperation (0)
deleteEntry (1…10)
na (255)
*DeleteAllNwIpRanges
(*NwMngParameters 12)
Applicable to all units. Deletes all
entries from the Management IP
Ranges Table.
Integer
deleteAll (1)
cancelOperation (2)
na (255)
*ApClientIpAddress
(*NwMngParameters 13)
Applicable to SU/RB only. The IP
address of a WiFi AP connected
to the unit.
IP address
E.2.4 IP Parameters
MIB Parameter Description Value/Range
*IpParams
(breezeAccessVLMib 4)
*UnitIpAddress
(*IpParams 1)
Applicable to all units. IP address
of the unit.
IP address
*SubNetMask
(*IpParams 2)
Applicable to all units. Subnet
mask of the unit.
IP address
*DefaultGWAddress Applicable to all units. Default IP address