User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
218
E.2.3 Network Management Parameters
MIB Parameter Description Value/Range
*NwMngParameters
(breezeAccessVLMib 3)
Network management
parameters.
*AccessToNwMng
(*NwMngParameters 1)
Applicable to all units. The port
to be used for remote
management.
Integer
fromwirelessOnly (1)
fromEthernetOnly (2)
fromBothWirelessnAndEthernet (3)
na (255)
*NwMngFilter
(*NwMngParameters 2)
Applicable to all units. Disables
or enable IP address based
filtering of management
messages on one or both ports.
Integer
disable (1)
activateOnEthernetPort (2)
activateOnWirelessPort (3)
activateOnBothWirelessAndEthernet
(4)
na (255)
mngIpFilterTable
(*NwMngParameters 3)
Applicable to all units. A table of
up to 10 IP addresses of stations
that are authorized to access the
unit for management purposes.
Not accessible.
mngIpFilterEntry
(mngIpFilterTable 1)
Applicable to all units. A
Management IP Addresses
Table entry. Not accessible.
*NwMngIpAddress
(mngIpFilterEntry 1)
Applicable to all units. An IP
address in the Management IP
Addresses Table entry.
IP address
*NwMngIpTableIdx
(mngIpFilterEntry 2)
Applicable to all units.
Read-only. A table index for an
entry in the Management IP
Addresses Table.
Integer
1-10
*DeleteOneNwIpAddr
(*NwMngParameters 4)
Applicable to all units. Deletes a
single selected entry from the
Management IP Addresses
Table.
Integer
cancelOperation (0)
deleteEntry (1…10)
na (255)
*DeleteAllNwIpAddrs
(*NwMngParameters 5)
Applicable to all units. Deletes all
entries from the Management IP
Addresses Table.
Integer
deleteAll (1)
cancelOperation (2)
na (255)
*AccessToNwTrap
(*NwMngParameters 6)
Applicable to all units. Enables or
disables the sending of SNMP
traps.
Integer
disable (1)
enable (2)
mngTrapTable
(*NwMngParameters 7)
Applicable to all units. A table of
up to 10 IP addresses of stations
to which to send SNMP traps.
Not accessible.
mngTrapEntry
(mngTrapTable 1)
Applicable to all units. A
Management Trap Table entry.
Not accessible.
*NwMngTrapCommunity
(mngTrapEntry 1)
Applicable to all units. The trap
community associated with the
applicable entry in the
Management Trap Table.
DisplayString (SIZE(14))
Up to 14 printable ASCII characters.
*NwMngTrapAddress
(mngTrapEntry 2)
Applicable to all units. An IP
address in the Management Trap
Table.
IP address
*NwMngTrapTableIdx
(mngTrapEntry 3)
Applicable to all units. Read only.
Index for an entry in the
Management Trap Table.
Integer
1-10