User's Manual

breezeAccessVLMib
BreezeACCESS VL System Manual
217
MIB Parameter Description Value/Range
*ConfigurationFileName
(*ConfigurationFileLoading 1)
Applicable to all units. The name
of the configuration file to be
downloaded/uploaded.
DisplayString (SIZE(80)).
Up to 20 printable ASCII
characters. An empty string is
not allowed.
*OperatorDefaultsFileName
(*ConfigurationFileLoading 2)
Applicable to all units. The name
of the Operator Defaults file to be
downloaded/uploaded.
DisplayString (SIZE(80)).
Up to 20 printable ASCII
characters. An empty string is
not allowed.
*FTPConfigurationFileSourceDir
(*ConfigurationFileLoading 3)
Applicable to all units. The source
directory of the required file in the
FTP server
DisplayString (SIZE(80)).
Up to 80 printable ASCII
characters. Use “.” To clear field.
*ExecuteFTPConfigurationFileLoading
(*ConfigurationFileLoading 4)
Applicable to all units. Execution
of the file download/upload
operation.
Integer
executeFTPGetConfiguration
File (1)
executeFTPPutConfiguration
File (2)
executeFTPGetOperator
Defaults (3)
executeFTPPutOperator
Defaults (4)
cancel (5)
*EventLogFileUploading
(*FTPParameters 4)
Applicable to all units. Event Log
file upload parameters.
*EventLogFileName
(*EventLogFileUploading 1)
Applicable to all units. The name
of the event log file to be
uploaded.
DisplayString (SIZE(80)).
Up to 20 printable ASCII
characters.
*EventLogDestinationDir
(*EventLogFileUploading 2)
Applicable to all units. The
destination directory for the event
logd file in the FTP server
DisplayString (SIZE(80)).
Up to 80 printable ASCII
characters. Use “.” To clear field.
*UploadEventLogFile
(*EventLogFileUploading 3)
Applicable to all units.
Execution of the event log upload
operation
Integer
uploadFile (1)
cancel (2)
*LoadingStatus
(*UnitControl 11)
Applicable to all units. The status
of an FTP or TFTP loading
process.
Integer
inProcess (1)
successful (2)
failed (3)
*EventLogFileParams
(*UnitControl 12)
Event Log parameters
*EventLogPolicy
(*EventLogFileParams 1)
Applicable to all units. The lowest
severity of events to be logged.
Integer
message (1)
warning (2)
error (3)
fatal(4)
logNone(5)
*EraseEventLog
(*EventLogFileParams 2)
Applicable to all units. Erase the
log file.
Integer
eraseEventLog (1)
cancel(2)
*SysLocation
(*UnitControl 13)
Applicable to all units. The unit
location.
DisplayString (SIZE(0..34))
*FeatureUpgrade
(*UnitControl 14)
Feature Upgrade parameters
*FeatureUpgradeManually
(*FeatureUpgrade 1)
Applicable to all units.
Upgrade unit to support new
feature.
DisplayString (SIZE(32..64))
License string: 32 to 64
hexadecimal digits.
*ChangeUnitType
(*UnitControl 15)
Applicable RB/BU only. Change
the unit type between BU and RB.
Integer
bu (1),
rb (2),
cancel (3)