User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
216
MIB Parameter Description Value/Range
(*UnitControl 8) passwords.
*ReadOnlyPassword
(*UnitPasswords 1)
Applicable to all units. The User
(read only) password.
DisplayString (SIZE(8)).
Up to 8 printable ASCII
characters.
*InstallerPassword
(*UnitPasswords 2)
Applicable to all units. The
Installer password.
DisplayString (SIZE(8)).
Up to 8 printable ASCII
characters.
*AdminPassword
(*UnitPasswords 3)
Applicable to all units. The
Administrator password. This is
also the SNMP Write Community
String.
DisplayString (SIZE(8)).
Up to 8 printable ASCII
characters.
*EthernetNegotiationMode
(*UnitControl 9)
Applicable to all units. Ethernet
port mode of operation.
Integer
force10MbpsAnd
HalfDuplex (1)
force10MbpsAnd
FullDuplex (2)
force100MbpsAnd
HalfDuplex (3)
force100MbpsAnd
FullDuplex (4)
autoNegotiationMode (5)
*FTPParameters
(*UnitControl 10)
Applicable to all units. FTP
parameters
*FTPServerParams
(*FTPParameters 1)
Applicable to all units. General
FTP server parameters.
*FTPServerUserName
(*FTPServerParams 1)
Applicable to all units. The user
name to be used for access to the
FTP server
DisplayString (SIZE(20)).
Up to 18 printable ASCII
characters.
*FTPServerPassword
(*FTPServerParams 2)
Applicable to all units. The
password to be used for access to
the FTP server
DisplayString (SIZE(20)).
Up to 18 printable ASCII
characters.
*FTPClientIpAddress
(*FTPParameters 3)
Applicable to all units. The IP
address of the FTP stack in the
unit. For SW version 4.0 and
higher this is read-only, set to the
IP Address of the unit.
IP address
*FTPServertIpaddress
(*FTPServerParams 4)
Applicable to all units. The IP
address of the FTP server
IP address
*FTPClientMask
(*FTPParameters 5)
Applicable to all units. The IP
MASK of the FTP stack in the
unit.
IP address
*FTPGatewayIPAddress
(*FTPParameters 6)
Applicable to all units. The FTP
Default Gateway IP address.
IP address
*FTPSwDownload
(*FTPParameters 2)
Applicable to all units. SW
download parameters.
*FTPSwFileName
(*FTPSwDownload 1)
Applicable to all units. The name
of the SW file to be downloaded.
DisplayString (SIZE(80)).
Up to 20 printable ASCII
characters. An empty string is
not allowed.
*FtpSwDownloadSourceDir
(*FTPSwDownload 2)
Applicable to all units. The source
directory of the required file in the
FTP server
DisplayString (SIZE(80)).
Up to 80 printable ASCII
characters. Use “.” To clear field.
*DownloadSwFile
(*FTPSwDownload 3)
Applicable to all units. Execution
of the SW download operation.
Integer
downloadFile (1)
cancel (2)
*ConfigurationFileLoading
(*FTPParameters 3)
Applicable to all units.
Configuration file and Operator
Defaults file download/upload
parameters.