User's Manual

Appendix E - BreezeACCES VL MIB
BreezeACCESS VL System Manual
214
MIB Parameter Description Value/Range
entry.
*CountryDependentParameterFrequencies
(*CountryDependentParameterEntry 2)
Applicable to all units.
Read only. The
frequencies included in the
applicable sub-band entry.
DisplayString
*AllowedBandwidth
(*CountryDependentParameterEntry 3)
Applicable to all units.
Read only. The bandwidth
when using the applicable
the sub-band.
Integer
*RegulationMaxTxPowerAtAntennaPort
(*CountryDependentParameterEntry 4)
Applicable to all units.
Read only. The maximum
allowed Tx power at the
antenna port when using
the applicable sub-band.
Integer
*RegulationMaxEIRP
(*CountryDependentParameterEntry 5)
Applicable to all units.
Read only. The maximum
allowed EIRP when using
the applicable sub-band.
Integer
A Regulation Max EIRP of
100 means no limit.
*MinModulationLevel
(*CountryDependentParameterEntry 6)
Applicable to all units.
Read only. The minimum
supported modulation
level.
Integer
level1 (1)
level2 (2)
level3 (3)
level4 (4)
level5 (5)
level6 (6)
level7 (7)
level8 (8)
*MaxModulationLevel
(*CountryDependentParameterEntry 7)
Applicable to all units.
Read only. The maximum
supported modulation
level.
Integer
level1 (1)
level2 (2)
level3 (3)
level4 (4)
level5 (5)
level6 (6)
level7 (7)
level8 (8)
*BurstModeSupport
(*CountryDependentParameterEntry 8)
Applicable to all units.
Read only. The supported
Burst Mode Option.
Integer
supported (1)
notSupported (2)
*MaximumBurstDuration
(*CountryDependentParameterEntry 9)
Applicable to all units.
Read only. Applicable only
if Burst Mode Option is
supported. The maximum
supported burst duration.
Integer
*DfsSupport
(*CountryDependentParameterEntry 10)
Applicable to AU/BU only.
Read only. The supported
DFS Option.
Integer
supported (1)
notSupported (2)
*MinimumHwRevision
(*CountryDependentParameterEntry 11)
Applicable to all units.
Read only. The Minimum
HW Revision needed to
support the Sub-Band.
Integer
hwRevisionA (1),
hwRevisionB (2),
hwRevisionC (3),
hwRevisionD (4),
hwRevisionE (5),
na (255)
*AuthenticationEncryptionSupport
(CountryDependentParameters 3)
Applicable to all units.
Read only. The supported
Authentication Encryption
Option.
Integer
supported (1)
notSupported (2)
*DataEncryptionSupport
(CountryDependentParameters 4)
Applicable to all units.
Read only. The supported
Integer
supported (1)