User's Manual

Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
146
threshold (not accessible to the user) will be reported as regular Phy errors, while
those with levels higher than the threshold will be reported as detected radar
pulses.
When DFS (radar detection) is used, the Pulse Detection Sensitivity cannot be set
to Low (forced to high). When Spectrum Analyzer is running, the Pulse Detection
Sensitivity is automatically forced to high for the duration of the test.
The default is High.
4.2.6.2.18.6 Show Noise Immunity
Select this option to view the current values of the Noise Immunity Control
parameters, and some additional parameters of the ANI mechanism.