User's Manual

Menus and Parameters
Operation and Administration
89
4.2.2.3 Show Advanced Configuration
The Show Advanced Configuration menu enables to access the read only sub
menus that display the current values of the parameters included in the
applicable sub menus of the Advanced Configuration menu.
4.2.2.4 Show Country Dependent Parameters
Each country has its radio regulation regarding transmissions in the applicable
bands that affect parameters such as available frequencies, bandwidth, transmit
power, etc. Some other parameters and options may also vary among countries.
For each country, one or more sets of parameters are pre-configured in the
factory. If more than one set is available, the set to be used can be selected. The
Show Country Dependent Parameters displays the available set(s) of these
parameters, and includes the following:
 Country Code: The up to 3 digits country code according to ISO 3166 and
the country name. Some regulatory requirements apply to more than one
country. In these cases the Country Code includes a 4 digits proprietary
group code and the Country Group name (for example FCC).
 Data Encryption Support: Indicates whether data encryption is supported
for the applicable country.
 AES Encryption Support: Indicates whether encryption using AES is
supported for the applicable country.
 Authentication Encryption Support: Indicates whether authentication
encryption is supported for the applicable country.
For each of the available sets (Sub-Bands), the following information is provided:
 Sub-Band ID and Frequencies
 Allowed Bandwidth: If more than one bandwidth is allowed, then each
bandwidth is associated with a different sub-band, as the bandwidth may
affect the available frequencies.
 Regulation Max Tx Power at Antenna Port: The maximum transmit power
allowed at the antenna port of the unit.
 Regulation Max EIRP: The maximum allowed EIRP (Effective Isotropic
Radiated Power) in dBm, or No Limit.
 Min Modulation Level: The lowest allowed modulation level.