User's Manual

Chapter 4 - Operation and Administration
BreezeACCESSS VL System Manual
4-18
NOTE
There is one set of general FTP parameters (FTP Server IP Address, FTP Gateway
IP Address, FTP Client IP Address, FTP Client IP Mask, FTP User Name and FTP
Password). This set (or relevant parts of the set) serves the SW Download Procedure,
the Configuration File Upload/Download procedure and the Event Log File Upload
procedure. Changing any of these parameters in the menu for either procedure will
automatically change its value in the menu for the other procedures.
Configuration File Upload/Download
The Configuration File Upload/Download submenu enables the optional
uploading or downloading of a configuration or an Operator Defaults file
from a remote FTP server. The Configuration File Upload/Download
submenu includes the following options:
! Execute FTP GET/PUT Configuration File: The Execute FTP
GET/PUT Configuration File executes the upload/download of a
Configuration file or an Operator Defaults file according to the
parameters defined below. The following options are available:
# Execute FTP Get Configuration File (cfg)
# Execute FTP Put Configuration File (cfg)
# Execute FTP Get Operator Defaults File (cmr)
# Execute FTP Put Operator Defaults File (cmr)
! FTP Configuration File Source Dir: The FTP Configuration File
Source Dir option enables defining the source directory of the
configuration/Operator Defaults file.
Valid values: A string of up to 80 printable ASCII characters. To
clear the field press "."
The default is an empty string.
! Configuration File FTP File Name: The Configuration File FTP File
Name option enables defining the name of the configuration file to
be uploaded/downloaded.
Valid values: A string of up to 20 printable ASCII characters. An
empty string is not allowed.
The default is config.cfg.
! Operator Defaults FTP File Name: The Operator Defaults File
Name option enables defining the name of the Operator Defaults file
to be uploaded/downloaded.