User's Manual

Chapter 4 - Operation and Administration
BreezeACCESSS VL System Manual
4-16
Valid values: A string of up to 8 printable ASCII characters.
Refer to Working with the Monitor Program
, on page 4-2 for a list of the
default passwords for each of the access levels.
Flash Memory Control
The Flash Memory Control submenu enables selecting the active
software version for the unit.
The flash memory can store two software versions. One version is called
Main and the other is called Shadow. New software versions are loaded
as the shadow version. You can select the shadow version as the new
active version by selecting Reset and Boot from Shadow Version.
However, after the next reset, the main version is re-activated. To
continue using the currently active version after the next reset, select
Use Running Version After Reset: The previous shadow version will be
the new main version, and vice versa.
The parameters configured in the unit are not changed as a result of
loading new software versions unless the new version includes
additional parameters or additional changes in the list of parameters.
New parameters are loaded with their default values.
Select from the following options:
! Reset and Boot from Shadow Version: Activates the shadow
(backup) software version. The unit is reset automatically. Following
the next reset the unit will switch to the main version.
! Use Running Version After Reset: Defines the current running
version as the new main version. This version will also be used
following the next reset.
SW Version Download
The SW Version Download submenu enables the optional downloading
of a SW Version file from a remote FTP server. The SW Version
Download submenu includes the following options:
! Execute FTP GET SW Version: The Execute FTP GET SW Version
option executes the SW Version FTP download according to the
parameters defined below.
! FTP SW Source Dir: The FTP SW Source Dir option enables
defining the source directory of the SW version file.
Valid values: A string of up to 80 printable ASCII characters. To
clear the field press "."