User's Manual

Menus and Parameters
Manual Revision 1.0
4-9
Show Advanced Configuration
The Show Advanced Configuration menu enables you to access the read
only sub menus that display the current values of the parameters
included in the applicable sub menus of the Advanced Configuration
menu.
Show Country Dependent Parameters
Each country has its radio regulation regarding transmissions in the
applicable bands that affect parameters such as available frequencies,
bandwidth, transmit power, etc. Some other parameters and options
may also vary among countries. For each country, one or more sets of
parameters are pre-configured in the factory. If more than one set is
available, the set to be used can be selected. The Show Country
Dependent Parameters displays the available set(s) of these parameters,
and includes the following:
! Country Code: The up to 3 digits country code according to ISO
3166 and the country name. Some regulatory requirements apply to
more than one country. In these cases the Country Code includes a
4 digits proprietary group code and the Country Group name (for
example FCC).
For each of the available sets (Sub Bands), the following information is
provided:
! Sub Band ID and Frequencies
! Allowed Bandwidth: If more than one bandwidth is allowed, than
each bandwidth is associated with a different sub-band, since the
bandwidth may affect the available frequencies.. Currently only a
bandwidth of 20 MHz is supported.
! Max Tx Power: The maximum transmit power allowed at the
antenna port of the unit.
! Max EIRP: The maximum allowed EIRP (Effective Isotropic Radiated
Power).
! Min Modulation Level: The lowest allowed modulation level
! Max Modulation Level: The highest allowed modulation level
! Burst Mode: Indicates whether Burst Mode operation is allowed.
! Maximum Burst Duration: If Burst Mode is allowed, this parameter
displays the upper limit for the Maximum Burst Duration.