User's Manual

Chapter 3 - Commissioning
BreezeACCESSS VL System Manual
3-14
Verifying the Indoor-to-Outdoor
Connection (Modular Base Station)
Once you have connected the unit to an Ethernet outlet, verify that the
Ethernet Integrity Indicator, which is the yellow LED embedded in the
RADIO connector, is on. This indicates that the unit has detected an
Ethernet link connection. The Ethernet Activity Indicator, which is the
green embedded LED, should blink whenever the unit receives or
transmits traffic on the RADIO port.
Verifying Data Connectivity
To verify data connectivity, from the end-user’s PC or from a portable
PC connected to the unit, ping the Access Unit, or try to connect to the
Internet.