User's Manual

Chapter 2 - Installation
BreezeACCESSS VL System Manual
2-16
The design of the BS-SH-VL supports collocation of BreezeACCESS VL
Access Units with Access Units belonging to other BreezeACCESS
families using GFSK modulation. It supports any mix of BS-AU VL
modules with BreezeACCESS GFSK BS-AU modules, including an
optional BS-GU-GPS module. If Access Units belonging to other
BreezeACCESS families are used, than it is necessary to use two power
supply modules: one BS-PS-VL (AC or DC) power supply for the
BreezeACCESS VL Access Units and one BS-PS GFSK (AC or DC) for the
BreezeACCESS GFSK Access Units.
BS-PS- AC-VL Power Supply Module
The BS-PS-AC-VL is an AC to DC converter that provides power to all
the BS-AU VL modules installed in the BS-SH-VL chassis. The BS-PS-
AC-VL front panel is shown in Figure 2-8.
Figure 2-8: BS-PS-AC-VL Front Panel
The BS-PS-AC-VL provides a power input connector, marked AC IN, for
connecting the AC power cord to the mains.
The ON/OFF Power Switch controls the flow of mains power to the
power supply module.