User's Manual

Installing the Universal IDU Indoor Unit
Manual Revision 1.0
2-13
Installing the Universal IDU Indoor
Unit
The unit can be placed on a desktop or a shelf. Alternatively, it may be
wall-mounted. The drilling template included with the unit can be used
to simplify the wall installation process.
The equipment is shipped with either a PS1036 (white box) or a PS1073
(black box) IDU. The type is marked on the bottom of the unit. The
functionality is very similar, although there are some mechanical
differences between the two types, as shown in the following figures:
Figure 2-5: IDU PS 1036 Front Panel
Figure 2-6: IDU PS 1073 Front Panel
In the PS1036 IDU, all connectors, indicators and RESET button are
located on the front panel. In the smaller PS1073 (black colored) IDU,
the RADIO connector and RESET button are located on the front panel,
the ETHERNET connector is located on the side panel and LEDs are
located on the top panel. There are also some differences in the names
and functionality of the LEDs.